§ 9-153. Electrical code adopted.

(a)

All electrical construction and all materials and appliances used in connection with the installation, maintenance and operation of electrical wiring, apparatus or equipment for utilization of the service for the supply company in providing electrical energy for light, heat or power, inside or attached to buildings or property within the jurisdiction of the city shall conform to such special rules and regulations as may be embodied in this or other ordinances of the city and to the 2014 Edition of the Rules and Regulations of the National Fire Protection Association (National Electrical Code—NFPA 70) for the installation of wiring and apparatus for electrical purposes, as they are now established; and such rules and regulations are hereby adopted and approved as part of this chapter.

(b)

The 2011 Edition of the National Electrical Code is amended as follows:

(1)

Section (a)230-70, Location , is deleted in its entirety.

(c)

Notwithstanding any contrary provisions in the 2011 Edition of the National Electrical Code, modular or manufactured wiring systems which are UL approved may be used for lighting purposes only.

(Ord. No. 110D, Pt. II, § 5, 3-27-69; Ord. No. 110D-1, § 2, 5-12-75; Ord. No. 110D-2, § 1, 12-18-78; Ord. No. 110-E, § 11, 1-8-90; Ord. No. 110-F, § 8, 4-12-93; Ord. No. 867, § 3, 8-24-98; Ord. No. 110-H, § 7, 7-26-99; Ord. No. 867-1, § 1, 6-8-00; Ord. No. 1416-2010, § 1, 4-12-10; Ord. No. 1416-2013, § 1, 7-22-13; Ord. No. 1416-2015 , § 1, 12-7-15)

Editor's note

Section 1 of Ord. No. 1416-2010, adopted April 12, 2010, changed the title of § 9-153 from "Adopted" to "Electrical code adopted."